Integrated Analyzer Complex

 

Instrument cabinet with blowing and gas analyzer FUJI version for operation up to -400ºС

  • Measured components: O2, CO, CO2, SO2, CH4, CH4 and NOx
  • Explosion protection: Ex pz for Zone B-1g
  • Measuring range: As agreed (depends on the type of gas analyzer)
  • Accuracy: 2% of scale (repeatability)
  • Signal outputs: 4-20 mA, Modbus
  • Power Supply: 220 V / 50 Hz, 2000 W
  • Dimensions and weight: 2100х1100х700 (HxWxD), 250 kg
  • Additional support: Instrument air for purging, 3-4 atm, 90-120 l / min
  • Certification:
    • Type Approval Measurement Certificate JP.C.31.001A No 53135
    • Explosion Certificate TS No RU C-JP.GB04.V.00153
  • Work at outside temperature to minus -60 hail.
  • Overall dimensions (VhGhSh) 2140kh1600kh1150mm (Classic type 210.110.110)

CONFIGURATION:

  1. Stationary gas analyzer with a sampling probe and a heated filter
  2. Heated sample transport line (length as agreed)
  3. Sample preparation system
  4. Explosion-proof lamp with switch (explosion protection marking 2ExedmIICT4)
  5. Explosion-proof air conditioner IceQube (explosion protection marking 2ExnACIIT3)
  6. Calibration mixture bottle
  7. Electric heaters (explosion protection mark 2ExdeIICT6 ... T1)
  8. Door with dimensions 1890x1000 mm
  9. Blowing device. It is possible to issue a dry contact signal to the automated process control system: (explosion protection marking 2ExnAC [pz] IIT4)
  10. Staples for loading and fastening to a concrete base
  11. Window for observing the analyzer screen (Possibility to remove the analyzer control button to the front panel)
  12. Air pump
  13. Terminal boxes (Ex mark 2ExeibmIICT6..T4)
  14. Fittings for input and output of pneumatic lines in the cabinet

Have questions? Ask now!